| Author |
 Topic  |
|
Breddan
Member
200 Posts |
 Posted - 2008/02/17 : 19:44:40
|
| Kortslutningsvänligt kretskort? :D |
"less is MORE" "MORE is better" |
 |
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/02/21 : 16:55:43
|
Digital Do Main fra Japan
B-1a forsterker 1,050,000Y
D-1a preamp/dac 1,575,000Y
 |
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:43:24 |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/02/21 : 16:58:29
|
Transparent Opus MM2
UPSOMM OPUS MM RCA Interconnect MM2 Update $2495
UPBOMM Balanced OPUS MM Interconnect MM2 Update $2995
UPOMM OPUS MM Speaker Cable MM2 Update $4995 |
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:43:58 |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/02/21 : 17:32:27
|
Gryphon VIP kabler
2x1m ¤2200
2x2m ¤8500
¤1800
 |
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:45:28 |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
|
|
cybwiz
700.000-klubben
1388 Posts |
|
|
Hinken74
Member
1102 Posts |
Posted - 2008/03/10 : 18:27:20
|
Gemme högtalarna var grymt fina...
|
Mvh/Henrik
---------------------------------------------------------------------------------------------------
Mitt system:
Von Schveikert db99,
Audio aero capitole Prestige SACD SE
Octave V70 samt strömrenare från Agile
|
|
|
|
cybwiz
700.000-klubben
1388 Posts |
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/11 : 20:02:25
|
Pagani
Sleek polished aluminum and carbon fiber stereo system.
expect nothing less than a big six-figure number from Pagani.#65289;
Analog turntable for LP for 33rpm and 45rpm
CD player with D/A converter
Stereo preamplifier
Power amplifier
Floor standing loudspeakers
Cables signal,loudspeaker and power
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:47:16 |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/11 : 20:11:24
|
Beskrivelse av Pagani systemet
LP turntable for 33rpm and 45 rpm:
Analog turntable is a really sensible equipment to vibration.
For this reason, to have the best performance, we decided of using advanced and particular technical solutions.
Starting from project to choosing the right materials, every small details was done in the best way to have an amazing sound performance.
Aluminium part connecting base to preamplifier are with special shape and with anti-vibration treatment, the plate is done in special material and with a surface to have the best contact with LP, thanks also to the sharpless ends clamp to avoid bad resonance in Nyquists range.
The hinge we decided to project is one of the few in the world that uses magnetic suspension to separate the turntables plate from the main base.
The hinge is done in hardened steel to prevent damage due to the friction with ear-ring. These two parts require the best and maximum mechanical precision. Lubricating is composed by Teflon and lithium to reduce at minimum dynamic friction to permit electric onductivity to discharge electrostatic tension.
Rotation is given to the plate by the electric engine with rubber belt, insulated from turntable#8217;s chassis and realized with 4 small synchronized engines in parallel configuration to increase torque and precision of rotating speed and its possible rotating speed from 33rpm to 45rpm changing position of the belt on the engines pulley.
Tone arm is a SME IV with magnesium cane, one of the finest worlds tone arm, cabled in copper Litz cable.
Phono cartridge is done by Ortofon, chosen for its great musicality and quality.
Phono preamplifier is done with quality components.
All cables used are handmade twisted copper Litz cables.
Transformer is handmade and glued in epoxidic resin inside iron box to shield electromagnetic fields and separated from chassis with silent blocks.
CD Player
CD mechanic used is the famous CDM PRO 2B, the best digital mechanic of the world, guaranteed for 30.000 hours of work.
The hinge is custom made and the clamp is done with particular shape and material to avoid resonance.
Digital connection from mechanic to DAC is in I4S standard.
Digital to Analog Converter is projected for this stereo equipment and it uses 4DSP by Burr Brown 24bit,96kHz in parallel for channel and all pcb boards are handmade.
Single power supply for DAC and for digital mechanic.
All cables for digital and analog pcb are handmade twisted copper Litz cable.
Transformers are handmade and glued in epoxidic resin inside iron box to shield electromagnetic fields and separated from chassis with silent blocks.
Preamplifier
Realized with high quality components and handmade built, it#8217;s different from normal equipment thanks its musicality, dynamic and impressive frequency range from 3Hz to 3MHz. Single ended building.
Completely done with discrete components circuit without operationals.
Signal cables are in handmade twisted copper Litz cable.
Power supply tension is 15V, max output segnal tension 2V.
Transformers are handmade and glued in epoxidic resin inside iron box to shield electromagnetic fields and separated from chassis with silent blocks.
Case is done in top quality carbon fibre handmade by Pagani Automobili.
Power amplifier
Completely handmade with discrete components circuit without operationals.Single ended built.
Different from the normal equipment for higher musicality and #8220;live#8221; dynamic.
Realized with many high quality capacitors to increase speed and dynamic.
6 transistor TO3 for channel.
2 transformers for channel for preamplifier circuit and power circuit glued in epoxidic resin inside iron box to shield electromagnetic fields and separated from chassis with silent blocks.
Continuous power 150W on 8Ohm, 2000W peak power.
Internal signal cables and loudspeaker cables are handmade twisted copper Litz cable.
Case is done in top quality carbon fibre handmade by Pagani Automobili.
Floor standing Loudspeakers:
To have great dynamic, a good power resistance and a good bass deepness we decided to do a floor standing loudspeaker.
Loudspeakers are 3 and half ways: woofer for bass frequencies with carbon fibre cone, midwoofer with carbon fibre, high quality ribbon tweeter, ribbon Supertweeter.
Cabinet is done in top quality carbon fibre handmade by Pagani Automobili with many reinforced parts and covered with anti-vibration materials to avoid carbon fibre resonances and distortion.
Front panel in aluminium 20mm thick, covered in anti-vibration materials.
Case charged bass reflex with 4 different long tubes, following Zondas exhaust tubes but with technical background, not only style.
Panel with connectors: connectors for high frequencies and low frequencies for bi-wiring connection and with XLR connector to connect LED with RGB multicolour technology.
Frequency range: 30hz-90kHz, sensitivity 91dB, long term power 200W, short term power 350W.
Signal, loudspeaker and power cables:
All cables wires used are handmade twisted copper Litz cable, proprietary technolgy of Delta Sigma.
Thanks to their particular structure and choosing high quality copper, wires have a really good frequencies response and a really natural sound.
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2008/03/11 20:13:17 |
|
|
|
EuphoniC
Klubbmästare i HiFi Norr
3091 Posts |
Posted - 2008/03/12 : 09:03:41
|
Herre-jösses va osmakligt råsnygga Pagani-prylarna var!  |
/Jonas
|
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/13 : 22:31:20
|
Pass Labs SR 1 - $25000
Four-way floorstanding system
The SR1 has been designed to harness the classic mass controlled piston model, in which the speakers radiating surface behaves as a rigid surface. This yields a well-defined characteristic in the spectral region where the sound is proportional to the electrical current through the voice coil.
The cone surface must maintain its shape over the frequency band without breaking up into resonant vibrational modes.
The suspension and motor system must remain linear with high excursion.
Nextel-coated cones and a Crescendo tweeter from the renowned Seas of Norway.
10-octave audio range without significantly leaving the piston region.
The SR1 uses dual enclosures. A large bass enclosure with ten-inch and eight-inch drivers handles the bottom four octaves, and an adjustable smaller enclosure carries the midrange and the tweeter.
The SR1 is available as a bi-amplified or quad-amplified system, complete with active crossover filters.
Impedance does not dip below 4 ohms
Sensitivity 90 dB
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2008/03/13 22:32:53 |
|
|
|
Just Audio Magic
Semesterfirare
553 Posts |
Posted - 2008/03/14 : 14:48:10
|
| hmm... Pagani systemet ser ju ut som ngt som katten dragit hem... ;) |
Micke äger och driver Just Audio Magic tillsammans med Jenny !
www.justaudiomagic.se |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/14 : 17:34:13
|
NAT Audio Symmetrical preamp
Design Features
- full dual mono construction with 12 tubes (6 per each channel)
- zero feedback design
- all triode pure class A configuration
- double regulated, hybrid output high precision power supply
- high current output super tube 6N30P-DR double triode (military grade), long life over 10 000 hours
- plasma effect are used for stabilization in power supply realized with OA 2 tube (new old stock)
- vacuum tube power supply rectification with EZ80 tube
- high quality single audiophile grade capacitor of high capacitance on signal path
- polypropylene capacitors in high voltage power supply
- two low density silent power transformers each per channel for analog stages custom made for NAT
- separate low density silent power transformer for digital stages custom made for NAT
- soft start operate
- relay network attenuation
- gold plated teflon insulated RCA jacks with gold plated XLR balanced connectors
- hand assembled all aluminum modulated chassis
- laser engraved front panel made from triple separate aluminum block of 20mm thick
- laser engraved remote control made from solid block of aluminum
- extensively used computer numeric control machines (CNC)
Frequency Response 0.07 Hz to 300 kHz #8211;3 dB; 20Hz to 20kHz ± 0.01 dB
Noise : < -95 dB "A" weighted @ 1V rms
Gain : 10 dB (X 3.16) Phase status:non-inverted (0 degree)
THD & N : < 0.03 % 20 Hz to 20kHz @ 1V rms
Input Impedance : > 47 kohms single ended: >94 kohms balanced
Stereo Separation : > 100 dB @ 1 kHz
Tube Complement : 2 X 6N30P-DR;2 X OA 2;2 X EZ80,2 X 6N1P-EV, 2 X 6N6P & 2 X 6N2P-EV
Output Impedance : < 70 ohms on single ended ; <140 ohms on balanced
Power Requirements : 110 VAC to 240 VAC @ 50 to 60 Hz, max. 100 VA
Dimensions : 19" wide x 18" deep x 6.5" high
NET Weight : approx. 38 lbs. unpacked
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:48:18 |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/16 : 13:16:36
|
David Berning Quadrature Z mono forsterker - $30000 pr
Both single and balanced input, all balanced amplification.
Special triode-like screen-drive output stage.
Low negative feedback, no phase compensation used.
Constant output impedance over entire audio spectrum.
Built-in five-stage power-line filter and surge suppressor.
Non-magnetic chassis prevents skin-effect induced distortion.
Separate shielded enclosure for power supply reduces noise.
Power consumption: idle-125 W; max-500 W. Power factor corrected.
Line voltage required: 100-240 VAC, 50-440 Hz.
Signal to noise: broadband (typical) 55 dB, all feedback settings. 20 kHz bandwidth (typical): 98 dB, NORM feedback; 92 dB, MED feedback; 86 dB, LOW feedback. All figures unweighted.
Distortion (typical, at 8 ohm loads at 200 W): 0.3%, NORM feedback; 0.5%, MED feedback; 1%, LOW feedback. These double at 4 ohms.
Typical output power at onset of clipping: 8 ohms 220 W; 4 ohms 270W.
Frequency response at 5 W, 8 ohms; +0, -3 dB: 2 Hz to 90 kHz, NORM feedback; 2 Hz to 60 kHz, MED feedback; 2 Hz to 40 kHz, LOW feedback.
Frequency response at 5 W, 4 ohms; +0, -3 dB: 2 Hz to 50 kHz, NORM feedback; 2 Hz to 40 kHz, MED feedback; 2 Hz to 30 kHz, LOW feedback.
Full power bandwidth (-3 dB), 4 ohms: 20 Hz to 50 kHz, NORM feedback; 20 Hz to 36 kHz, LOW feedback. Low frequency bandwidth limit intentionally set by speaker protection (0dB down at 20 Hz).
Typical output impedance (measured at 1 amp, 60 Hz): 0.8 ohms, NORM feedback; 2 ohms, MED feedback; 5 ohms, LOW feedback.
Sensitivity, 200 W, 8 ohms: 1V, single-ended input. Feedback gain compensated.
Input impedance: 35 k -50 k, depending on feedback setting, both single-ended and balanced inputs.
Tube complement: (4) 33JV6 output; (2) 16GK6 driver; (3) 12AT7 input and gain.
Size: 48 cm wide, 48 cm deep, 20 cm high, (19 X 19 X 8 inches), including connectors and feet.
Net weight: 15 kg (32 lb); Boxed, 17 kg (38 lb).
Finish: silver face and back anodized aluminum, top and sides light gray paint with silver anodized accent bars.
Comes equipped with Stillpoint TM vibration damping feet.
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 04:49:35 |
|
|
|
christopher
Member
561 Posts |
Posted - 2008/03/16 : 21:38:26
|
Läkert med Pagani,
Efter McLaren har vi en ny sportsbil tillverkare som gör Hifi. DEt syns att de har hittat inspiration från deras bilar. |
An idea which isn't considered to be dangerous is not worst being call an idea |
|
|
|
EuphoniC
Klubbmästare i HiFi Norr
3091 Posts |
Posted - 2008/03/17 : 08:46:50
|
| Fast avgasrörsportarna blev kanske lite "för mycket" |
/Jonas
|
|
|
|
MartinH
Audiotrade
3778 Posts |
Posted - 2008/03/17 : 09:46:57
|
Kan nämna att Berning Quadrature Z finns hemma på demo hos oss på Audiotrade.
Världens starkaste OTL rörslutsteg !!!
Mvh, Martin |
|
|
|
Cyrus
Member
734 Posts |
Posted - 2008/03/17 : 10:44:32
|
| Pagani ser ut som en bilstereo för hemmabruk i kolfiberstuk. |
|
|
|
RobertH
Member
400 Posts |
Posted - 2008/03/20 : 15:14:07
|
| Ja, Pagani så verkligen hemska ut. Gillar inte alls när det blir så väldans överdriven design. Sen att jag föredrar trä är ju en bidragande faktor. |
Wilson Benesch ACT Two | Pass B1-Buffer | Pass Labs X250 | Opera Reference 2.2 MkIII CD | Clearaudio Evolution Magnum | Lyra Kleos/Sumiko Palo Santos Presentation | Tom Evans Microgroove Plus X RIAA |
|
|
|
cybwiz
700.000-klubben
1388 Posts |
|
|
cybwiz
700.000-klubben
1388 Posts |
Posted - 2008/03/20 : 23:18:54
|
Vitus har oppgradert sin Signature serie.
SL-100/SP-100 har blitt SL-101/SP-101.
Scd-010, SS-010, SS-101 og SM-101 har kommet i Mk2 versjoner.
Hva som er forskjellen fra de gamle modellene er ukjent, noen som vet?
Priser
SL-101 ¤25000
SP-101 ¤22800
Sm-101 II ¤45600
Ss-101 II ¤27600
Scd-010 II ¤13500
Ss-010 II ¤13500
|
http://cybwiz.blogspot.com/ |
Edited by - cybwiz on 2009/10/30 00:53:30 |
|
|
|
Peter J
f.d. Raceman
205 Posts |
Posted - 2008/03/24 : 09:36:59
|
På Transparent OPUS2 priserna, fattas det inte någon siffra på de som du har angivet?
Det verkar lite billigt i förhållande till vad OPUS1 serien kostar här hemma? |
|
|
|
Ampalang
fd. drbob
1136 Posts |
Posted - 2008/03/24 : 09:59:51
|
quote:
UPSOMM OPUS MM RCA Interconnect MM2 Update $2495
UPBOMM Balanced OPUS MM Interconnect MM2 Update $2995
UPOMM OPUS MM Speaker Cable MM2 Update $4995
quote:
På Transparent OPUS2 priserna, fattas det inte någon siffra på de som du har angivet?
Det verkar lite billigt i förhållande till vad OPUS1 serien kostar här hemma?
Priserna som är angivna gäller vid uppgradering från OPUS MM till OPUS MM2.
|
|
|
|
Peter J
f.d. Raceman
205 Posts |
Posted - 2008/03/24 : 11:49:34
|
| Då förstår jag, det lät för bra för att vara sant annars;) |
|
|
|
Topic |
|
All Forums
High-End Nyheter
New Topic
Printer Friendly
