quote:

---

Output stage 510
With the 510 it concerns a mono output stage, which stands regarding the in and output configuration at the earliest in the tradition of the 50E: A transducer-coupled loudspeaker exit makes also here the signal available at several secondary windings for different targeted applications. The 510 comes along in a simple 19"-Gehaeuse with 2 height units. On the front are the power switch, several announcements for different operating conditions as well as the lockable (!) level controller.

As is the case for the 240, Ein-und of exits is implemented in XLR- and/or Neutrik NL-4 Steckernorm. During the XLR entrance it concerns a symmetrical entrance, internally the input signal with a Symmetriertransformator processes itself. Further an oblong admission for a small plate, the so-called "output Matching board" is on the back. By changing bridges one can adapt thereby the output stage to loads, which can lie between 2 ohms and 80 ohms. Also this equipment is thus 100-V-tauglich; in addition QUAD indicates that almost beliebeig many output stages of this type can be parallel switched into row or, in order to make larger expenditure to tensions and/or stream available. About 150 Watts carry 510 out during full rejection depending upon adjustment.

Between 1984 and 1995 about 3,800 copies of this output stage were manufactured

---

quote:

---

During the XLR entrance it concerns a symmetrical entrance, internally the input signal with a Symmetriertransformator processes itself

---