| Author |
 Topic  |
|
|
mauro d.
Starting Member
5 Posts |
 Posted - 2004/01/29 : 22:54:12
|
what do you think about the 13m8640-00 ?
and in comparison with d52 ?
thank you in advance |
|
|
mace
London calling
5296 Posts |
Posted - 2004/01/30 : 00:58:33
|
and
 M |
mera quad ESL = mera välljud.
"Efter tillnyktring vaknade han upp medvetslös" TV4-Nyhetsmorgon.
Bio har inte varit detsamma sedan Nickel Gammaldags försvann :-(
"Det finns egentligen inga rakor på den här banan, de enda rakorna som finns är böjda" Eje Elgh, Australiens F1-GP 2008.
Mr 500! |
 |
|
|
mauro d.
Starting Member
5 Posts |
Posted - 2004/01/30 : 15:05:09
|
i don't understand!
what are you saing? |
|
|
|
x8668k
Member
118 Posts |
Posted - 2004/01/30 : 15:08:47
|
quote:
what do you think about the 13m8640-00 ?
and in comparison with d52 ?
thank you in advance
That is what he is saying, what it means on the other hand...  |
Guldfiskminne... |
|
|
|
Zalve
Nerikes Audiofiler
18938 Posts |
Posted - 2004/01/30 : 15:17:33
|
What is "13m8640-00" and "d52" ? Some sort of circuit ?
Che cosa è "13m8640-00" e "d52"? Una certa specie del circuito?
Se provate a spiegare un po'di più. Che cosa state provando a costruire con "13m8640-00"?
Jag bad honom förklara vad han skulle bygga med dem... |
"Vänner är de där ovanliga människorna som frågar dig hur det är och sen väntar på svaret. / Okänd" |
|
|
|
x8668k
Member
118 Posts |
Posted - 2004/01/30 : 15:28:21
|
Ja, Italienska är inte min starka sida precis...
Låter inte som nån förstärkare jag känner igen iaf, eller CD, eller, så det kan ju vara det du skrev. |
Guldfiskminne... |
|
|
|
DIYamps
Ej medlem längre
785 Posts |
Posted - 2004/01/30 : 15:28:39
|
| zalve: hur många språk kan du??? du verkar kunna en del. |
|
|
|
x8668k
Member
118 Posts |
Posted - 2004/01/30 : 15:30:15
|
SCAN-SPEAK 2.5" CONE MIDRANGE
Excellent driver with extended frequency range and wide dispersion. Symmetric Drive magnet system with a light paper cone, coated for optimum damping of resonances. Low loss rubber surround ensures high resolution combined with very low and controlled distortion figures. Textile dome, coated dust cap. The sound is detailed and clean and has a very natural balance. Best Xover 300Hz+.
Pwr 100Wrms (@300Hz)
Sd 48cm²
Coil 38mmØ (0.10mH)
Re 8W (5.8Wdc)
Fr 64Hz(Fs)®8KHz
Sens’ 87.5dB
Qms 2.70
Qes 0.27
Qts 0.24
Vas 5.00L
Code 13M8640-00 |
Guldfiskminne... |
|
|
|
Audio Nicke
Member
306 Posts |
Posted - 2004/01/30 : 15:43:32
|
You probably mean to ask our advice about Middrange speakers.
Is it possebly the scanspeak 13m8640 and the Dynaudio d52?
If this is your question you have to give us a little more info.
What tweeter are you thinking about using?
What bas?
And ofcourse give us some sort of idea what kind of result your hoping for.
Then we can perhaps help you some more.
/N |
Stavar som en kratta bara så ni vet;-))
/Nicke |
|
|
|
Zalve
Nerikes Audiofiler
18938 Posts |
Posted - 2004/01/30 : 16:19:17
|
Snyggt jobbat grabbar att hitta beteckningarna. Nu till Italienska 
x8668k ha scritto:
Driver eccellente di MEDIA SCADENZA del CONO di SCAN-SPEAK 2.5"con la gamma di frequenza estesa e la dispersione larga. Sistema simmetrico del magnete dell'azionamento con un cono di carta chiaro, ricoperto per inumidirsi ottimale delle risonanze. La gomma bassa di perdita circonda accerta l'alta risoluzione unita con le figure molto basse e controllate di distorsione. Cupola della tessile, cappuccio parapolvere rivestito. Il suono è dettagliato e pulito ed ha un equilibrio molto naturale. Xover Migliore 300Hz+.
Pwr 100Wrms (@300Hz)
Sd 48cm²
Coil 38mmØ (0.10mH)
Re 8W (5.8Wdc)
Fr 64Hz(Fs)®8KHz
Sens’ 87.5dB
Qms 2.70
Qes 0.27
Qts 0.24
Vas 5.00L
Code 13M8640-00
---------------------------
Nicke audio ha scritto: Voi probabilmente medi per interrogare il nostro consiglio riguardo agli altoparlanti di Middrange. È possebly lo scanspeak 13m8640 ed il Dynaudio d52? Se questa è la vostra domanda dovete darci un poco più Info. Che tweeter state pensando a usando? Che bas? Ed il ofcourse ci dà una certa specie dell'idea che genere di risultato la vostra speranza per. Allora possiamo forse aiutarli un po'di più.
Grabbar... Kom ihåg att det alltid finns nån som kan... I detta fall http://babelfish.altavista.com/babelfish/tr 
Mauro d. Usi questo luogo a transate il vostro italiano a http://babelfish.altavista.com/babelfish/tr inglese |
"Vänner är de där ovanliga människorna som frågar dig hur det är och sen väntar på svaret. / Okänd" |
|
|
|
molsson
Member
1646 Posts |
Posted - 2004/01/30 : 16:34:18
|
| babelfish. hahaha. Hoppas att det blev begripligt. Det brukar bli helt hysterisk meningsbyggnad. |
No hay banda!! |
|
|
|
Jesper_Nilsson
Member
494 Posts |
Posted - 2004/01/30 : 17:01:25
|
I have no experiece with the dynaudio driver but the 13M8640 is a very nice driver. It have some serious breakup at 10Khz, and a 3db bump at about 2k. The 3db bump is not a big consern but I guess it should be removed for best result. I've used it together with a 9300 tweeter crossed at 3k 2:nd order and no notch filter (for the 3db bump) with very good result.
/Jesper |
|
|
|
mauro d.
Starting Member
5 Posts |
Posted - 2004/01/30 : 21:14:46
|
hey people !
thanks a lot for your answer.
now more detailed notice:
i mount per speaker two 21w8555-01,two 18w8545-00,one mid dome ,and one mdt33.
- 21w8555-01 scan-speak woofer;
- 18w8545-00 scan-speak mid woofer;
- 13m8640-00 scan-speak mid cone;(comparison with d52af)
- mdt33 morel triple magnet sistem tweeter (home components).
the mid must work from 1khz ti 2khz,which is the better between scan and dynaudio?
these are the componets i use in detail.
|
|
|
|
Zalve
Nerikes Audiofiler
18938 Posts |
Posted - 2004/01/30 : 23:03:00
|
| Do you want help with the cross-over parts or just our opinion about your plans ?! |
"Vänner är de där ovanliga människorna som frågar dig hur det är och sen väntar på svaret. / Okänd" |
|
|
|
jonasz
Member
2542 Posts |
Posted - 2004/01/30 : 23:16:54
|
I think he means wich of the mids that will work best in this application 1-2 khz. I really have no idea myself but I guess d52af have higher sensitivity while the 8640 can be crossed lower. I would use the d52 because of the sensitivity and you don't have to use a low crossoverpoint.
Cheers |
You'll Never Walk Alone... |
|
|
| |
Topic |
|
All Forums
Teknik och DIY
New Topic
Topic Locked
Printer Friendly